Laminar flow principle involves double filtration of air through coarse pre-filter (up to 5 microns) and Hepa filter (down to 0.3 microns) for filtration of biological and particulate contaminants. A constant uni-directional air flow is drawn from atmosphere and passed through pre and hepa filters on the work surface. Inner exposed areas are finished in epoxy paint. Table top covered with non glaring stainless steel sheet. Side panels are fixed and are made out of transparent acrylic sheet. The front door is folding type and made of thick acrylic sheet. (Optional) Stand is built in type or detachable.
Blower unit has Marathon or equivalent motor and is dynamically balanced with minimal sound & vibration level. Fluorescent lighting is also provided. A suitable UV tube is provided for sterilization. An acrylic block type manometer to measure static pressure in the chamber has been installed. Two way gas tap for gas line has also been provided.
|Working Size||2' x 2' x 2'||3' x 2' x 2'||4' x 2' x 2'||6' x 2' x 2'|
|Size of HEPA Filter||2' x 2' x 6”||3' x 2' x 6”||4' x 2' x 6”||3' x 2' x 6”|
|No. of HEPA Filter(Supplied with main unit)||1||1||1||2|
|No of pre filter||1||1||1||2|
|Illumination||1x20 W||1x20 W||1x40 W||2x20 W|
|U.V. Germical light||1x1½ ft.||1x1½ ft.||1x3 ft||2x3 ft|