B.O.D Incubator

Castor wheel mounted cabinet. Double wall construction with Inner chamber made of  stainless steel sheet. The gap of 75mm between the outer and the inner wall is filled with special grade glass wool. Supplied with  two/three removable perforated shelves. Exterior made out of thick mild steel sheet duly finished in powder coated paint with mat finished colour combinations. Outer double wall door is provided with magnetic gasket and lock & key arrangement. Inner door  unbreakable  acrylic transparent  sheet for inspection of material in the chamber without disturbing the chamber temperature. Door operated inner illumination has been provided. Temperature is controlled by Microprocessor Digital temp. Controller from 5° C to 50° C ± 0.5° C.  Standard cooling unit with a sealed compressor with protective devices has been provided below the chamber for safe and efficient working. Heating arrangement has been made with in the chamber for higher temperature working. Inner air circulating system is provided to achieve uniform temperature. A control panel is provided with various indicators, on-off switch. Supplied with cord and plug etc. To work on 220V AC 50Hz single phase.

OPTIONAL:

• Timer 0-24 hours day-night cycle.
• Co2/air mixer nozzle is provided.
• Internal illumination with 3 fluorescent tubes.
• Microprocessor PID LCD Display Temp.& Time Controller with alarm system.
• Automatic Voltage stabilizer 3 KVA (recommended - must).
• Automatic Voltage stabilizer 5 KVA (recommended - must).