We present exclusive Vertical Laminar Air Flow Cabinet. Here, the laminar flow principle involves double filtration of air through coarse pre-filter (up to 5 microns) and Hepa filter (down to 0.3 microns) for filtration of biological and particulate contaminants. A constant uni-directional air flow is drawn from atmosphere and passed through pre and hepa filters on the work surface. Fabricated out of reinforced ply board which is clad in from outside in laminated sheet and inner exposed areas are finished in epoxy paint. Table top covered with non glaring laminated sheet or stainless steel sheet. Side panels are fixed and are made out of transparent acrylic sheet. The front door is folding type and made of thick acrylic sheet. (Optional) Stand is built in type or detachable. Blower unit of this Horizontal Laminar Air Flow Cabinet has AUE or equivalent motor and is dynamically balanced with minimal sound & vibration level. Fluorescent lighting is also provided. A suitable UV tube is provided for sterilization. There is an acrylic block type manometer to measure static pressure in the chamber has been installed. Two way gas tap for gas line has also been provided. In Vertical Laminar Air Flow Cabinet laminar flows down vertically from top towards the work table. Vertical Laminar Air Flow Cabinet is supplied complete with static finish Mica table top. Transparent front door (5m.m), Static pressure Manometer, Built in U.V. Germicidal light & fluorescent light and Cock for gas, air or vacuum line.