Laboratory Incubators

Castor wheel mounted cabinet. Double wall construction with Inner chamber made of  stainless steel sheet. The gap of 75mm between the outer and the inner wall is filled with special grade glass wool. Supplied with  two/three removable perforated shelves. Exterior made out of thick mild steel sheet duly finished in powder coated paint with mat finished colour combinations. Outer double wall door is provided with magnetic gasket and lock & key arrangement. Inner door  unbreakable  acrylic transparent  sheet for inspection of material in the chamber without disturbing the chamber temperature. Door operated inner illumination has been provided. Temperature is controlled by Microprocessor Digital temp. Controller from 5° C to 50° C ± 0.5° C.  Standard cooling unit with a sealed compressor with protective devices has been provided below the chamber for safe and efficient working. Heating arrangement has been made with in the chamber for higher temperature working. Inner air circulating system is provided to achieve uniform temperature. A control panel is provided with various indicators, on-off switch. Supplied with cord and plug etc. To work on 220V AC 50Hz single phase.

OPTIONAL:

• Timer 0-24 hours day-night cycle.
• Co2/air mixer nozzle is provided.
• Internal illumination with 3 fluorescent tubes.
• Microprocessor PID LCD Display Temp.& Time Controller with alarm system.
• Automatic Voltage stabilizer 3 KVA (recommended - must).
• Automatic Voltage stabilizer 5 KVA (recommended - must).

Standard double wall fabrication. Inner chamber made out of richly anodized aluminium or highly polished stainless steel sheet and outer made out of thick mild steel sheet finished in white stoving enamel/powder coated paint with mat finished colour combinations. Double wall door with double glass window for observation in the chamber. Temperature range 5° C above ambient to 80° C ± 1° C controlled by a thermostat. The equipment is workable on 220 V Ac 50 Hz single phase. 

OPTIONAL: 

• Air circulating fan.
• Timer 0-24 hours.
• Digital temp. Indicator-cum-Controller.
• Microprocessor PID LCD Display Temp.& Time Controller with alarm system.

Standard double-wall construction. Outer chamber made out of mild steel finished in powder-coated paint with mat-finished colour combinations. Inner chamber made of stainless steel sheet. The door provided with a glass full view window. Interchangeable platform has been provided.  Temperature range 5°C above ambient to 60° C ± 1° C is controlled by a digital controller & Air circulating fan. Variable speed control regulator controls the speed up to 200 rpm. Control panel with Digital Temp. Controller, Digital RPM Indicator, Digital Timer, Speed control & One-off switch. To work on 220V Ac 50Hz single phase. Capacity 16x250ml or 500ml conical flasks.

OPTIONAL: 

• Timer 0-24 hours
• Microprocessor PID LCD Display Temp.& Time Controller with alarm system.